|Page 1 of 1|
|Author:||winced36 [ Sat Oct 31, 2020 9:54 am ]|
|Post subject:||Bungalow project|
Been wanting to give the Tribute to Tinplate bungalow project a try, and this week I finally found some time to get started:
File comment: Tribute to Tinplate bungalow projectIt's scaled a bit larger than the Lionel version, so it should look a little better than an original when sitting adjacent to other O-gauge buildings and equipment.
Bungalow 3.jpg [ 161.93 KiB | Viewed 1598 times ]
First attempt...we'll see how this goes.
|Author:||winced36 [ Thu Nov 05, 2020 6:51 pm ]|
|Post subject:||Re: Bungalow project|
Okay, with the exception of giving it a clear gloss overspray, the bungalow project is complete:
File comment: Lionel bungalow projectLearned quite a bit in constructing this, much of which will be applied in the next project. One thing, if you give this a try, you need to scale the porch/entryway up quite a bit. It's far too small when compared to the Lionel 184 bungalow (see upper right image). I'm not sure if this was a function of my printing it too small somehow, or if it's just scaled wrong in the plans. I should have been paying closer attention during assembly. Also, I made the roof a lift-off so I can put a light in it later if I decide to replace the windows.
Lionel 184 in paper.jpg [ 238.7 KiB | Viewed 1581 times ]
Good project...thanks to Paul and Howard for taking the time to develop and provide it for us.
|Page 1 of 1||All times are UTC - 5 hours|
|Powered by phpBB® Forum Software © phpBB Group