bigindoortrains.com
https://bigindoortrains.com/forums/

FUN SITE, NEW STUFF
https://bigindoortrains.com/forums/viewtopic.php?f=4&t=246
Page 1 of 1

Author:  javinda [ Fri Mar 06, 2020 5:59 am ]
Post subject:  FUN SITE, NEW STUFF

TIN TOY ARCADE https://www.tintoyarcade.com/tin-toys?g ... rWEALw_wcB

Author:  winced36 [ Sat Mar 07, 2020 9:12 am ]
Post subject:  Re: FUN SITE, NEW STUFF

Thanks for the link. There's some nice looking stuff there, ordered a few pieces, possible candidates for O-gauge use.

Author:  winced36 [ Tue Mar 10, 2020 8:51 am ]
Post subject:  Re: FUN SITE, NEW STUFF

Saw this repro of a Paya trolley on the store-site, couldn't resist for $6.75 plus $3.99 shipping. I figured this might be a good candidate for re-motoring for O-gauge.

A few observations:

- Its manufacture is pretty flimsy, all tab-and-slot assembly, no soldering of any joints, and the tin is pretty lightweight, so it took a beating in shipment. There's a few spots that will require some straightening.

- The mechanical motor (windup) is very weak and fidgety. Even if it had flanged wheels, which it does not, I doubt it could make it around a 27" circle of track more than once. Either a stronger mechanical motor will be required, or a step up to electric with an open-frame or can motor/chassis will be needed.

- The lithography is good, bright, and the trolley pole seems pretty sturdy. Proportionally, the body looks about right for O-gauge.

If I ever get around to converting it, I'll post some pictures. Could be a fun project.

Attachments:
File comment: Repro of a Paya mechanical toy
Paya trolley.jpg
Paya trolley.jpg [ 154.68 KiB | Viewed 7497 times ]

Author:  javinda [ Mon Mar 16, 2020 4:35 am ]
Post subject:  Re: FUN SITE, NEW STUFF

I've seen many pieces on that site that are unfortunately wind-up; I prefer battery operated....

Author:  winced36 [ Wed Mar 18, 2020 6:30 pm ]
Post subject:  Re: FUN SITE, NEW STUFF

The wind-up motor that came with the Paya trolley repro was really a poor effort. That and the fact that it comes without flanged wheels makes re-motoring a necessity (if you plan to run it on your tinplate layout). A few guys I know have re-motored them using Marx running gear, so I just need to hunt around and find a donor. A fun project, one of many in the project pile, lol.

Author:  javinda [ Thu Apr 02, 2020 4:53 am ]
Post subject:  Re: FUN SITE, NEW STUFF

Hi there, kind of off topic---looking for a small to mid-size BATTERY OPERATED TROLLEY--PREFERABLY METAL BUT PLASTIC will do....if you come across anything, please let me know....thanks!

Author:  winced36 [ Thu Apr 09, 2020 11:42 am ]
Post subject:  Re: FUN SITE, NEW STUFF

Any particular scale?

Author:  javinda [ Sat Jan 30, 2021 5:54 am ]
Post subject:  Re: FUN SITE, NEW STUFF

not too big; not too small!

Author:  winced36 [ Sun Jan 31, 2021 7:26 am ]
Post subject:  Re: FUN SITE, NEW STUFF

Haven't seen any battery-powered trolleys. Most I have found are either 3-rail transformer-powered or mechanical (and the mechanisms in the mechanical versions are miserable). Most of the new tin stuff is pretty flimsy in construction, not suitable for much other than display. If I see something, I'll flip you a link.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/