bigindoortrains.com
https://bigindoortrains.com/forums/

1958 LIONEL CROSSING GATE ACCESSORY
https://bigindoortrains.com/forums/viewtopic.php?f=30&t=144
Page 1 of 1

Author:  javinda [ Sat Jan 09, 2016 10:15 pm ]
Post subject:  1958 LIONEL CROSSING GATE ACCESSORY

No. 252 Crossing Gate produced by the Lionel Corporation, 15 East 26th Street, New York 10, New York; manufactured in 1958

wasn't sure where to put this--photo is in the public domain

Attachments:
lionel_252_crossing_gate_0002.jpg
lionel_252_crossing_gate_0002.jpg [ 40.25 KiB | Viewed 9707 times ]

Author:  paulrace [ Tue Jan 12, 2016 12:35 pm ]
Post subject:  Re: 1958 LIONEL CROSSING GATE ACCESSORY

Nice photo. I came up with one of the old Marx crossbucks at a flea market last year for a few $$$. Fun accessory, and the lights even work.

Author:  Howard [ Wed Jan 13, 2016 6:49 am ]
Post subject:  Re: 1958 LIONEL CROSSING GATE ACCESSORY

good morning...

speaking of crossing gates...and since paul mentioned marx...here's the one in my small collection of marx accessories...it's cosmetically complete but does not operate...i believe there is a return spring missing in mechanism...

howard...

Attachments:
marx rr crossing 003-001.JPG
marx rr crossing 003-001.JPG [ 121.73 KiB | Viewed 9694 times ]

Author:  paulrace [ Sat Jan 16, 2016 10:40 am ]
Post subject:  Re: 1958 LIONEL CROSSING GATE ACCESSORY

Howard, thanks for the photo What are the measurements on that thing?

Author:  Howard [ Sat Jan 16, 2016 6:34 pm ]
Post subject:  Re: 1958 LIONEL CROSSING GATE ACCESSORY

paul...here are dimensions of the marx railroad crossing...a little "over scale"...but that's the way marx did it...

howard...

Attachments:
marx rr crossing dimensions back side shown.jpg
marx rr crossing dimensions back side shown.jpg [ 95.03 KiB | Viewed 9682 times ]

Author:  javinda [ Sat Jan 30, 2016 10:54 pm ]
Post subject:  Re: 1958 LIONEL CROSSING GATE ACCESSORY

Very cool

Author:  paulrace [ Sun Jan 31, 2016 10:09 pm ]
Post subject:  Re: 1958 LIONEL CROSSING GATE ACCESSORY

Thanks, Howard.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/