bigindoortrains.com https://bigindoortrains.com/forums/ |
|
Standard Gauge Photo Gallery https://bigindoortrains.com/forums/viewtopic.php?f=15&t=102 |
Page 2 of 2 |
Author: | winced36 [ Fri Aug 21, 2015 12:20 pm ] |
Post subject: | Re: Standard Gauge Photo Gallery |
Yup, the Lionel 68 looks sharp. Around the holidays I put one on the fireplace mantle...helps smoke out any toy-train buffs that visit the house. |
Author: | winced36 [ Fri Mar 04, 2016 12:39 pm ] |
Post subject: | Re: Standard Gauge Photo Gallery |
A recent 'rescue' from the local antique mall...needs some work: ![]() The refurbished trucks were recovered from an early Lionel piece...they should work here. I think I might repaint the roof at some point, but just clean up the body and interior. Paul II |
Author: | paulrace [ Mon May 02, 2016 7:18 pm ] |
Post subject: | Re: Standard Gauge Photo Gallery |
Paul, what material did they use over the windows on the side? It looks like they're in good condition compared to many I've seen. |
Author: | winced36 [ Fri Jul 08, 2016 8:23 pm ] |
Post subject: | Re: Standard Gauge Photo Gallery |
Paul - The top-side window material is a plastic film with a mottled white and blue treatment hand-applied to it. Reproduction machine-printed material is available but it is a bit thicker and less translucent then the original. If possible (and it usually is) one should try to recover the original material for re-use. Like the clear plastic window material, it is held in place by a few sharp-edged tabs. When I get around to working on this car I'll need to add a pick-up to one of the trucks to provide current for the lighting. The earliest versions of these cars had no installed lights...they were lit by a string of lights that could be purchased separately and run through them from a connection on the locomotive. I've only ever seen one of those kits manufactured by Lionel. The 33 that I have has the connecting post but it is not wired into the loco. Here's a pic of what the kit looks like: ![]() Paul II |
Author: | winced36 [ Sat Jan 21, 2017 10:07 am ] |
Post subject: | Re: Standard Gauge Photo Gallery |
An MTH reproduction of the Lionel 9E (with a Franklin Mint 1/24-scale Mercedes 300SL): ![]() I often wonder what the correct "scale" is for Standard Gauge...somewhere beween 1/24-1/32 I suspect. Paul II |
Author: | winced36 [ Thu Mar 15, 2018 1:49 pm ] |
Post subject: | Re: Standard Gauge Photo Gallery |
An MTH 9E reproduction polishes the rails beneath our 2017 Christmas tree: ![]() A former shelf-queen, this loco needed a Protosound chip reset before we could get it running. It's a common problem with battery-backup Protosound units. At some point I'll go back and install rechargeable capacitors (BCR's) to this and my 392E, mitigating the problem. Paul II |
Author: | winced36 [ Fri Dec 21, 2018 6:58 am ] |
Post subject: | Re: Standard Gauge Photo Gallery |
Christmas 2018: ![]() Lionel 33/35/36 set from 1925-1926. Despite a chunk missing from one of the drive-wheels and a few teeth from the pinion gear, still runs like a champ. Looks about right... Paul II |
Author: | winced36 [ Wed Mar 06, 2019 9:15 am ] |
Post subject: | Re: Standard Gauge Photo Gallery |
Another shot of the Lionel 33 from a couple months back: ![]() We'll work on getting the 10 back in running order for 2019. Paul II |
Author: | javinda [ Thu Mar 07, 2019 2:24 pm ] |
Post subject: | Re: Standard Gauge Photo Gallery |
Love these! You do excellent restoration work |
Author: | winced36 [ Fri Jan 31, 2020 11:39 am ] | |||
Post subject: | Re: Standard Gauge Photo Gallery | |||
Picked up this Lionel 517 recently. Turns out it's a bit unusual for the two-tone paint and orange windows (although I swear I've seen a number of them). Years ago I bought an MTH standard gauge freight set with a 392E up front with a string of brass-trimmed 500-series freights. For whatever reason, the dealer shipped me a 517 with the late all-red scheme with nickel trim. At the time I didn't throw a fit, but I came to hate the one out-of-sync car. This original 517 will be its replacement. Just a bit of polishing up and it'll be good to go.
|
Page 2 of 2 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://phpbb.com/ |