The original project used a glasses case for the roof. Howard has added a version that uses a Nestles' Quik box. The version above used the glasses case and a tin that the modeler cut to height. Here are his words:
--------------------------------------
I used your artwork by gluing it around a suitably sized tin although I had to trim down the height with some tin snips. As you can see I did use an old glasses case as the clerestory roof section. I had some flashing LEDs that were removed from a cheap Christmas decoration and used these on the perimeter of the diner roof. I mounted the whole thing on an MDF base that I found at a craft store and decorated it with black and white glass tiles and green felt balls, also from the craft store. Hope you like my version of your diner. Thanks for an inspirational web site.
----------------------------------------
The original article, including the graphics shown above, as well as graphics for Halloween and Christmas projects are shown here:
http://bigindoortrains.com/primer/build ... _diner.htm
By the way, Howard and I LOVE seeing projects that you've done (or even attempted) with our plans and graphics. Please continue to share.
http://bigindoortrains.com/contact.htm
